Bico Hand Driven Rotarex Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Zařízení Bico Hand Driven Rotarex. BICO Hand Driven Rotarex User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 5
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
BICO DULIN HAND DRIVEN ROTAREX SEPARATORS
For the determination of bitumen content character and gradation of aggregates in bituminous paving
material. Operation requires only ten minutes. The sample is first weighed then heated slightly to start crumbling,
cooled and placed in the Rotarex bowl. Solvent is then added. When set in motion, centrifugal action forces all
liquid through a filter paper gasket at the periphery of the bowl, effectively cleaning and drying the sample. Solvent
should be periodically added to the sample while the bowl is in motion to clean the sample until it runs perfectly
clear from the drain spout. Aggregates are then weighed and graded. Weight before and after extraction of bitumen
determines constituent proportions.
Solvent is recovered via an aluminum catch basin draining to a spout. The bowl cover is held in place by a center
filler screw, consisting of a funnel shaped piece which screws into the power shaft head (and also serves as an inlet
for additional solvent while the Rotarex is running.
***OPERATING INSTRUCTIONS***
Remove plug at end of housing and fill housing with oil, which is supplied with the machine; replace plug.
To remove bowl, press on lock pin and turn bowl SLOWLY until pin engages in the hole in the shaft and locks the
shaft. Then unscrew bowl by turning to the
right.
DO NOT PRESS ON THE PIN WHILE THE MACHINE IS IN MOTION
To stop the machine, it is necessary to remove the receptacle cover and press on the cover of the aluminum bowl.
BOWL STEM IS LEFT HAND THREAD
Zobrazit stránku 0
1 2 3 4 5

Shrnutí obsahu

Strany 1

BICO DULIN HAND DRIVEN ROTAREX SEPARATORS For the determination of bitumen content character and gradation of aggregates in bituminous paving m

Strany 2

TEST PROCEDURE 1. Weigh out desired quantity of sample and distribute evenly and uniformly around the bowl to avoid off balance loading. This

Strany 3

BICO HAND DRIVEN DULIN ROTAREX SPARE PARTS ***PLEASE ADVISE SERIAL NUMBER WHEN ORDERING SPARE PARTS*** CATALOG # DESCRIPTION

Strany 4

CATALOG # DESCRIPTION LBS/KG 52-10X Steel Stem for 1500 GM Bowl 1/.4 52-11 Nut

Strany 5

CATALOG # DESCRIPTION LBS/KG 52-40 Lid Lift Cam for Receptacle 1/.4 52-44 F

Komentáře k této Příručce

Žádné komentáře